制藥網
詳細介紹
產品介紹
Product Introduction
超高速印字機MH200是被動牽引式油墨印字機，主要用于電線、電纜、PVC軟硬管、PU管、尼龍管、熱縮管及其他配合擠出機之擠出材料的表面印刷。
Ultra-high speed printer Mh200 is passive traction type of printing ink printer, mainly used for the surface printing of wires, cables, PVC soft and hard pipes, PU tube, nylon tube, heat-shrink tube and other extruded materials of other supporting extruder.
標印內容為：商標、廠名、型號、規格、制造日期、及其性能等。
The printed content include trademark, factory name, model, specification, date of manufacture, its performance, etc.
工作原理：
Operating Principle
利用擠出材料與印字輪之間的摩擦力，帶印字輪轉動，使印字輪表面的帶有油墨的印字內容在被印物上。使用電機帶動油墨，表面封蓋，并在兩側刮墨，保證高速印字的情況下，油墨不會飛濺。
The use of the friction between extruded materials and printing wheel, with the rotation of printing wheel makes the printing content with printing ink on printing wheel surface on the printed object. Use motor to drive printing ink, the surface is sealed with cover and ink is scrapped on both sides are to ensure the printing ink will not splash under high-speed printing.
主要技術參數:
Main Technical Parameters
本機工作高度 850mm----1150mm
Working Height of the Machine: 850mm----1150mm
適用印字輪外徑： Ф100mm
Outer Diameter of Applicable Printing Wheel: Ф100mm
適用印刷范圍： Ф0.5mm-----Ф15mm
Applicable Printing Scope: Ф0.5mm-----Ф15mm
印字機軸徑： Ф20mm
Printer Shaft Diameter: Ф20mm
印字速度： ≤800m/min
Printing Speed: ≤800m/min
壓輪上下調節距離： 20mm
Upper and Lower Adjustment Distance of Clamping Roller: 20mm
壓輪前后調節距離： 20mm
Front and Rear Adjustment Distance of Clamping Roller: 20mm
導向輪上下調節距離： 40mm
Upper and Lower Adjustment Distance of Guide Wheel: 40mm
導向輪前后調節距離： 40mm
Front and Rear Adjustment Distance of Guide Wheel: 40mm
制藥網