MSS型雙吸離心泵

流量：可達36330m3/h

揚程：可達160m

工作溫度：＜105°C

用途：適用于電站、自來水、市政、建筑、消防、工礦企業等行業，用于輸送清水或物理化學性質類似于清水的其他介質。

■ 特點Features

l   泵內置式密封潤滑結構，密封循環水對泵密封系統的潤滑、沖洗更為直接、有效。

l   直線型的外觀并在泵蓋上附加加強筋，內置式密封潤滑結構使泵整體結構渾然一體，靈活的結構設計使泵更加精美大方。

l   泵體吸入口與吐出口均在泵體的下方，這樣可以再不拆卸系列管道的情況下取出轉子，維修方便，大部分泵體采用雙流道設計，以減小徑向力。

l   泵體、泵蓋均采用樹脂砂板模造型，保證了外觀及流到尺寸以及泵的水力效率（不同于一般S、SH干模沙造型）。

l   葉輪進行平衡，確保了泵的運行平穩，噪聲降低。

l   軸縮短軸間距，增加軸徑，以延長軸承和機械密封的使用壽命，軸為全封結構，確保了不與介質接觸，不銹蝕，使用壽命長。

l   軸套根據不同用戶的需求可采用多種不同的材料，以防止軸的磨損和銹蝕。

l   軸封采用填料密封或機械密封，可以再不拆卸泵蓋的情況下更換密封裝置。

l   軸承及潤滑采用脂潤滑。傳動通過彈性聯軸器由電動機驅動。

l   旋轉方向：正轉為從驅動端看為順時針方向旋轉，反轉為從驅動端看為逆時針方向旋轉。

Pump inner sealing lubrication structure, the sealing circulation water can lubrication and wash the pump sealing system more directly and effect.

The linear appearance and adding strong then on the pump cover, the inside seal lubrication structure make pump structure more beautiful, and the flexible structure design action make pump look more perfect. The inlet and outlet located under the pump, therefore you can take the motor out without disassemble series pipe, it’s convenient to maintain, the most casing adopt double flowing passage designation, so that reduce the caliber direction force.

The casing, pump cover adopt resinic sａnd board mould sculpt, that ensured appearance more beautiful, passing dimension precision and pump’s water power efficiency (It’s different form common S、SH type sculpt).

The impeller is balance, that ensured pump operate reposefully, and have lower noise.

The shaft shorten shaft clearance, long than shaft caliber, in order to prolong the life of bearing and mechanical seal, the shaft is the whole sealing structure, that ensured it not contact with medium, can’t be eroded and prolonged using life.

The shaft cover adopts kinds of different material according to different users’ demand, that prevent shaft be frayed and eroded.

The shaft seal adopts padding seal or mechanical seal, can exchange seal device that needn’t disassemble pump cover.

The bearing and lubrication adopt resinic lubrication. It’s drived by motor through spring coupler.

Rotating direction : it’s clockwise, if seen from driving , and it contra rotate if seen from driving end for opposite rotation.

n   用途：

適用于電站、自來水、市政、建筑、消防、工礦企業等行業，用于輸送清水或物理化學性質類似于清水的其他介質。

Applied to transport eau douce or the medium whose physical and chemical characteristic are similar with eau douce. For power supply plant .municipal water ,building, fire-fighting works, mine and other industries.

n   工作條件：

l   出口直徑 Outlet caliber : 80~800mm

l   揚程范圍 Head range: 9~160m

l   流量范圍 Capacity range: 50~36330 m3/h       

l   工作溫度 Max working temperature <150

【詳細性能參數】

MSS與S、SH國外產品結構比較

n   型號意義（Designation）

型譜圖（Performance chart）：

MSS結構圖及主要零部件表

MSS內置密封、潤滑、沖洗原理圖 (Principle drawing of inside sealing, Lubrication and flushing)：

l   密封冷卻、潤滑管路一反傳統的雙吸泵外循環結構，而直接做在泵蓋和密封架里，水從泵壓出室沿管路進入機械密封腔室（填料），實現了冷卻、沖洗、潤滑作用，同時防止在泵起動時，空氣沿密封處進入吸水室，保證了機組的良好運行。

Sealed cooling and lubrication pipeline departs from the traditional outside-circulation structure of double-suction pumps. It is directly set in the casing cover and stuffing housing. Water from de pump chamber enters into the mechanical seal housing (packing) along the pipe to realize the function of cooling lubrication meanwhile, it prevents the air from entering into the suction room through the seal when pump is started. This ensures a good operation of whole machine.

l   此內置的冷卻、潤滑、沖洗密封管路結構簡單、工作穩定，省掉了繁瑣的外循環管路裝置，以及因此帶來的泵件結構變化。實現了整體結構的緊湊，外形美觀。

    The inside cooling 、lubrication and flushing sealed pipeline has a simple structure and stable operation. It reduces the complicated, outside-circulation pipe device as subsequent structure changes of the pump. The more important is it realizes the compactness of whole structure and a nice outline

標準型 (從傳動端向泵方向看，泵順時針旋轉)

Standard type (Viewing from drive end, clockwise ralotion)

特殊型 (從傳動端向泵方向看，泵逆時針旋轉)

Special type (Viewing from drive end, counter clockwise ralotion)