混合泵，衛生級不銹鋼泵系列 返回列表頁

    混合泵的吸入口可以利用負壓作用吸入氣體，所以無需采用空氣壓縮機和大氣噴射器。高速旋轉的泵葉輪將液體與氣體混合攪拌，所以無需攪拌器和混合器。由于泵內的加壓混合，氣體與液體充分溶解。所以無需大型加壓溶氣罐或昂貴的反應塔即可制取高度溶解液。氣液比約為1:9(吸氣量為8-10%),串聯使用可以增加吸氣量。一臺氣液混合泵即可進行氣液吸引、混合、溶解并直接將高度溶解液送至使用點。過泵流量 1-50 M3/H;處理水量1-150 M3/H 。因此，使用氣液混合泵，可以提高溶氣液制取效率、簡化制取裝置、節省場地、大幅降低初次投資、節省運行成本及維護費用。

折疊






The suction port of the mixing pump can use negative pressure to inhale gas, so there is no need to use air compressors and atmospheric ejectors. The high-speed rotating pump impeller mixes and stirs the liquid and gas, so there is no need for agitators and mixers. Due to the pressurized mixing in the pump, the gas and liquid are fully dissolved. Therefore, it is possible to prepare highly soluble liquid without a large pressurized gas tank or expensive reaction tower. The gas-liquid ratio is about 1:9 (8-10% inhalation), and it can be used in series to increase the inhalation. A gas-liquid mixing pump can carry out gas-liquid suction, mixing, dissolution and directly deliver the highly dissolved liquid to the point of use. The pump flow rate is 1-50 M3/H; the treated water volume is 1-150 M3/H. Therefore, the use of gas-liquid mixing pumps can improve the efficiency of gas-liquid production, simplify the production equipment, save space, greatly reduce the initial investment, and save operating costs and maintenance costs.

折疊應用范圍

折疊性能參數