FTW系列·全陶瓷無污染渦輪氣流分級機

產品詳情：

FTW系列·全陶瓷無污染渦輪氣流分級機
FTW series · Full ceramic non-contamination turbine air flow classifier
 
工作原理：
物料被定量加入分級機下部的分散腔內，在補風氣流的吹掃作用下得到初步分散，同時在負壓作用下上升，進入到上部分級腔內，在高速旋轉的分級輪處得到進一步分散，隨后接受高速分級輪的篩選，合格細粉會通過分級輪繼而通過管道進入后道收塵設備（旋風分離器、布袋除塵器等），較粗的顆粒將沿筒壁而下，從最下端被卸出。
working principle:
The material is quantitatively fed into the dispersing cavity at the lower part of the classifier, and is initially dispersed under the blowing action of the supplementary air flow, and at the same time rises under the action of negative pressure, enters the upper classifying cavity and gets further at the high-speed rotating classifying wheel Dispersed, and then screened by high-speed classifying rotor, qualified fine powder will pass through the classifying rotor and then enter the downstream dust collection equipment (cyclone separator, bag dust collector, etc.) through the pipeline. The coarser particles will go down the cylinder wall The lower end was unloaded.

 
設備特點：

1.   采用分級輪離心強制分選的原理，分級精度高，容易調控；
2.   主機內腔接觸物料部位可實現全部工程陶瓷防護，從而滿足多數高新材料避免金屬雜質污染的要求，關鍵部位包括進料機構、腔體內襯、分級輪、密封機構、出料機構等，特別是全陶瓷高速分級輪屬于我公司產品，經一體加工成型，線速度高，分級粒度精準可控；
3.   適用于球狀、片狀、纖維狀等各類粉體顆粒的干法分選；
4.   可與氣流粉碎機、機械粉碎機、振動磨機、攪拌磨機、球磨機、管磨機、輥磨機等各類粉磨設備組成閉式循環粉碎、分級自動化產線，優化產品粒度分布；
5.   匹配全流程自動化生產線，無粉塵外泄，綠色環保；勞動強度低；智能在線及遠程控制；
6.  

1. Adopt the principle of centrifugal forced sorting by classifying rotor, with high grading accuracy and easy adjustment;
2. The parts of the main unit cavity contacting the material can achieve all engineering ceramics protection to meet the requirements of most high-tech materials to avoid metal impurity contamination. The key parts include the feeding mechanism, the lining of the cavity, the classifying rotor, the sealing mechanism, the discharging mechanism, In particular, the all-ceramic high-speed classifying rotor belongs to our company's patented product. It is formed by one-piece processing, with high linear speed and accurate and controllable grading granularity;
3. It is suitable for dry sorting of spherical, flake, and fibrous powder particles;
4. It can be combined with various types of grinding equipment such as airflow pulverizer, mechanical pulverizer, vibratory mill, agitator mill, ball mill, tube mill, roller mill and other types of grinding equipment to optimize the product size distribution ;
5. Match the whole process automatic production line, no dust leakage, green environmental protection; low labor intensity; intelligent online and remote control;
 
技術參數表(Technical Data Sheet)：

注：具體配置及處理效果需根據物料性質與加工要求確認，可與我司工程師溝通或來料試驗。
Note: The specific configuration and processing effect need to be confirmed according to the material properties and processing requirements, and you can communicate with our engineers or come to do materials processing test first.
實物圖片(Physical picture)：

FTW-800-3（大型機）                     FTW-350（中型機）                        FTW-100（微型機）
FTW-800-3（super model）               FTW-350（medium model）                    FTW-100（Micro model）
 
參考工藝流程圖(Reference process flow chart)：