詳細介紹：該機自動進瓶，經定位器二次智能定位，確保灌裝噴管準確插入瓶內，噴管在灌裝液體時慢慢上升，*消除泡沫。本機由于采用了扶助式定位裝置，對于不能直立的各種異形瓶尤為適用。本機灌裝精度達±0.5%，瓶口無粘液污染，*符合GMP要求。
技術參數：
灌裝范圍：3-500ml
灌裝頭數：2-10頭
灌裝精度：±0.5%
灌裝速度：60-100瓶/分
適用瓶：圓形、方形、扁形、異形玻璃瓶和塑料瓶，特別適用于小口（1.5mm以上）、風油精瓶、紅花油瓶、香精瓶、細長瓶和各種不能直立的瓶型。
電機功率：精密調速電機 0.5kw 220v 50Hz
整機尺寸：2600×1000×1650mm
機器凈重：200kg
灌裝頭數：2-10頭
灌裝精度：±0.5%
灌裝速度：60-100瓶/分
適用瓶：圓形、方形、扁形、異形玻璃瓶和塑料瓶，特別適用于小口（1.5mm以上）、風油精瓶、紅花油瓶、香精瓶、細長瓶和各種不能直立的瓶型。
電機功率：精密調速電機 0.5kw 220v 50Hz
整機尺寸：2600×1000×1650mm
機器凈重：200kg
Introduction: This machine automatic feeding bottle, the locator two inligent positioning, ensure accurate filling nozzle inserted into the bottle, nozzle in filling the liquid slowly rise, to compley eliminate the foam. This machine adopts the support type positioning device for not erect, various special-shaped bottle is particularly applicable. This machine filling precision is up to ± 0.5%, mouth of mucus without pollution, fully meet the requirements of GMP.
Technical parameters:
Filling range: 3-500ml
Filling head number: 2-10
Filling precision:± 0.5%
Filling speed: 60-100 bottle / min
Bottle: round, square, flat, special-shaped glass bottle and a plastic bottle, particularly applicable to small （above 1.5mm ）, oil, safflower oil, perfume bottle bottle, an elongated bottle and various cannot erect bottle type.
Motor power: 0.5KW 220V 50Hz precision speed regulating motor
Machine size: 2600 x 1000 x 1650mm
Machine net weight: 200kg
采購中心
