軟管瓶／長徑瓶灌裝機

簡單介紹：我廠成功研制出CRG型細長頸軟膠袋灌裝壓蓋機。本機灌裝時，先將軟膠袋懸掛在一個旋轉盤周圍，灌裝頭定位器能準確找正瓶口，灌裝針頭能準確插 入細長頸內，直達壺部，深約15cm。本機灌裝速度均勻，有效防止產生泡沫反沖，每次灌裝四瓶。計量泵可精細調節，確保劑量精度。本機采用振蕩斗理蓋，扇形擺動式取蓋，氣動壓蓋，準確緊密。
 

軟管瓶／長徑瓶灌裝機主要技術參數：
1.灌 裝  頭 數：4頭                         2.壓蓋 頭 數：4頭
3.灌裝壓蓋速度：10~16瓶/分鐘                4.灌裝 范 圍：5~110ml
5.電  機 功 率：500w  220v    50Hz           6.外 形 尺寸：2000×800×1600mm
7.重        量：400kg

Brief introduction: our factory successfully developed a CRG elongated neck soft bag filling machine. This machine is filling, the soft plastic bags suspended in a rotating disk around, filling head positioner can accuray find positive bottle, filling needles can be accuray inserted into the fine long neck, to the pot, deep about 15cm. This machine filling velocity uniformity, effectively prevent bubble recoil, each filling four bottles. Metering pump capable of fine adjustment, ensure dose accuracy. This machine adopts the oscillating bucket sort, fan-shaped swing cover, pneumatic Capping, accurate close.

The hose bottle / long diameter of bottle filling machine main technical parameters:

1 filling heads number: 4

2 gland head number : 4

3 filling speed: 10~16 bottles per minute

4 filling range: 5~110ml

5 electric machine power: 500W 220V 50Hz

6 dimension: 2000× 800 × 1600mm

7 weight: 400kg