The minimum handling capacity is 100g.After the air is heated by an electric heater through the blower, the temperature reaches 180 ℃ (adjustable), the material is added to the feed hopper, and the screw feeder is evenly added into the drying pipe to contact with the hot air in parallel flow. Forming a convection-based complex heat exchange process that eventually meets the drying requirements of the product.
Small airflow dryer Product features:
1,The experiment process is intuitionistic, the adjustment is convenient, the equipment is easy to disassemble and easy to clean.
2,Air intake and feed volume can be adjusted conveniently and the operation is simple and easy.
3,Adopt multistage dust removal, product without loss.
4,Drying time is short, usually only a few seconds, the processing capacity is particularly suitable for expensive product research.
Small airflow dryer Work principle:
After the air is heated by an electric heater through the blower, the temperature reaches 180 ℃ (adjustable), the material is added to the feed hopper, and the spiral feeder is evenly added into the drying tube and contacted with the hot air, thus forming a complex heat exchange process dominated by convection. Finally meet the drying requirements of the product. The exhaust gas is emptied by cyclone separator and bag dust collector after drying pipe.
Technical parameters:
Model No.: QFN-QL-1500
Structural form: Integral movable mode
Shape size: 800mm × 2000mm × 3500mm
Heating mode: electric heating
Electric heating power: 12kW
Blower power 370W
Fan volume: 200m3 / h
Air inlet temperature: 180 ℃ (adjustable, automatic)
Water evaporation: 2-5kg / h
Air pipe diameter 63mm
Total equipment weight: 150kg
Control mode: PLC
上海喬楓經(jīng)過多年的發(fā)展，不斷的引進日本和德國的技術，克服了國內(nèi)很多物料很難噴霧干燥的難題，比如顆粒很難均勻的難題，平均顆粒15微米以下顆粒很難實現(xiàn)的難題，平均顆粒在100微米以上的難題，顆粒實心圓的難題等。
采購中心
