官方微信|手機版|本站服務|買家中心|行業動態|幫助

產品|公司|采購|招標

德國SITEMA夾緊裝置

參考價面議
具體成交價以合同協議為準
  • 公司名稱尚階（上海）自動化設備有限公司
  • 品       牌其他品牌
  • 型       號
  • 所  在  地上海
  • 廠商性質經銷商
  • 更新時間2018/4/5 20:23:16
  • 訪問次數881
在線詢價 收藏產品 查看電話 同類產品

聯系我們時請說明是 制藥網 上看到的信息，謝謝!

尚階（上海）自動化設備有限公司是主要經營歐美進口元器件的公司主要暴扣，儀器儀表，泵，閥傳感器，工裝夾具，機廠零配件，汽車零配件等等

儀器儀表 泵閥 傳感器
產地 進口 產品新舊 全新
德國SITEMA夾緊裝置 安全制動器 安全鎖 定位器
德國SITEMA夾緊裝置 產品信息

 

 

德國SITEMA夾緊裝置 安全制動器 安全鎖 定位器


:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。
 

TypeIdent.-No.Rod Ø mmAdmiss. load kNRelease press. barCasing height mmCasing Ø mm  
KSP 16KSP 016 011623,511496InquiryCAD
KSP 22KSP 022 012253,5137120InquiryCAD
KSP 22KSP 022 0222103,5137120InquiryCAD
KSP 25KSP 025 0125153,5142140InquiryCAD
KSP 28KSP 028 0228203,5173184InquiryCAD

 

TypeIdent.-No.Rod Ø mmAdmiss. load kNRelease press. barCasing Ø mmCasing height mm  
KRG 18KRG 018 0118710068122InquiryCAD
KRG 22KRG 022 01221010074130InquiryCAD
KRG 28KRG 028 012820100102170InquiryCAD
KRG 36KRG 036 013650100120204InquiryCAD
KRG 45KRG 045 014575100125230InquiryCAD
KRG 56KRG 056 0156100100155238InquiryCAD
KRG 70KRG 070 0170150100170272InquiryCAD
KRG 90KRG 090 0190250100210306InquiryCAD
KRG 110KRG 110 01110400100265385InquiryCAD

SITEMA Safety Locks
pneumatic / for compressive load

For complete measurements see:
S12 - Dimensions, pneumatic / compressive load

TypeIdent.-No.Rod Ø mmAdmiss. load kNRelease press. barCasing Ø mmCasing height mm  
KRGP 16KRGP 016 201653,582109InquiryCAD
KRGP 22KRGP 022 2022103,5102132InquiryCAD
KRGP 28KRGP 028 2028203,5155166InquiryCAD

 

Locking Units

Locking units are capable of retaining forces in both axial directions. They are used in a wide variety of machines. In most versions the clamping is spring actuated, and hydraulic or pneumatic pressure is required to release it. Shaft diameters range from 10 to 250 mm. The respective holding forces vary from 0.1 to 1000 kN, depending on style and customer requirements.

If the device is used as a restraint device and emergency brake in machine tools, a special version KFHW is available. For this reason, all the external parts and sealing surfaces are made of stainless steel.

Applications

Test stand

Ratchless fixation of the crossrail >>

Machine for concrete bricks

Temporarily fixation of moving machine parts >>

Bending press

Securing the horizontal position during bending process>>

Turning Machine; Lathe

Fixation of the center sleeve of a lathe >>

Suspension Bridge

Fixation of the hydraulic cylinders >>

Linear Drive

Safety for the z-axis of a machine tool >>

Automotive: Assembly Line

Fixation of the body in x- and y- direction >>

Automation in refinery industry

Safe fixation of the locking of a transport container >>

Automatic Welding Machine

Ratchless fixation of the workpiece >>

Machining large escope Mirror

Fixation of the supporting cylinder for high-end machining>>

Steelworks

Hydraulic wedge adjustment of the lower roll >>

Machine tool

Holding up the vertical axis of a machine tool >>

Clamping via disc springs, hydraulic releasing

Different types are available to fit to the common cylinders.

 

KFH, round casing (hydraulic)

for round cylinders and applications which are independent from a cylinder

 
  1. Customer-made coupling flange

SITEMA Locking Units
type KFH

Clamping via disc springs, hydraulic releasing

For complete measurements see:
F50 - Dimensions, type KFH

TypeIdent.-NoRod Ø mmAdmiss. load kNRelease press barCasing Ø mmCasing Length mm  
KFH 18KFH 018 5018107070122InquiryCAD
KFH 18KFH 018 511854070122InquiryCAD
KFH 25KFH 025 50252010095140InquiryCAD
KFH 25KFH 025 5125125095140InquiryCAD
KFH 28KFH 028 502840100115178InquiryCAD
KFH 28KFH 028 51282050115178InquiryCAD
KFH 32KFH 032 503240100115178InquiryCAD
KFH 32KFH 032 51322050115178InquiryCAD
KFH 36KFH 036 503650100138200InquiryCAD
KFH 36KFH 036 51363555138200InquiryCAD
KFH 40KFH 040 504050100138200InquiryCAD
KFH 40KFH 040 51403555138200InquiryCAD
KFH 45KFH 045 504575100155213InquiryCAD
KFH 45KFH 045 51454575155213InquiryCAD
KFH 50KFH 050 505075100155213InquiryCAD
KFH 50KFH 050 51504575155213InquiryCAD
KFH 56KFH 056 5056100100180228InquiryCAD
KFH 56KFH 056 51567070180228InquiryCAD
KFH 60KFH 060 5060100100180228InquiryCAD
KFH 60KFH 060 51607070180228InquiryCAD
KFH 70KFH 070 5070150100225302InquiryCAD
KFH 70KFH 070 51708060225302InquiryCAD
KFH 80KFH 080 5080150100225302InquiryCAD
KFH 80KFH 080 51808060225302InquiryCAD
KFH 90KFH 090 5090250130260360InquiryCAD
KFH 90KFH 090 5190190100260360InquiryCAD
KFH 100KFH 100 50100250130260360InquiryCAD
KFH 100KFH 100 51100190100260360InquiryCAD
KFH 125KFH 125 50125330100350405InquiryCAD
KFH 140KFH 140 50140600100430514InquiryCAD

KFHC, special version for machine tools (hydraulic)

SITEMA Locking Units
type KFHC

Clamping via disc springs, hydraulic releasing

For complete measurements see:
F17 - Dimensions, type KFHC

TypeIdent.-NoRod Ø mmHolding capacity kNRelease press barCasing Ø mmCasing Length mm  
KFHC 30KFHC 030 0130830116120InquiryCAD
KFHC 30KFHC 030 02301550116120InquiryCAD

KFHL, certified by Lloyd's Register

SITEMA - Locking Units type KFHL have been developed to satisfy the particular requirements associated with maritime applications. For example, the complete clamping system has been thoroughly adapted, both in terms of the materials used and the special housing designed to provide protection against any hazards associated with incoming sea water. Other measures include the use of special materials for the housing and seals, as well as the use of special coatings.
The admissible load in kN denotes the actual maximum load that can be applied to a SITEMA - Locking Unit KFHL. The actual holding force is twice as high and equates to the margin required by Lloyd's Register EMEA for the purposes of personal safety.

SITEMA Locking Units
type KFHL, certifié par Lloyd's Register

Clamping via disc springs, hydraulic releasing

For complete measurements see:
F52 - Dimensions type KFHL (certified by Lloyd's Register)

TypeIdent.-NoRod Ø mmAdmiss. load kNRelease press barCasing Ø mmCasing Length mm  
KFHL 18KFHL 018 501857083130InquiryCAD
KFHL 25KFHL 025 502510100109148InquiryCAD
KFHL 28KFHL 028 502817100129188InquiryCAD
KFHL 32KFHL 032 503217100129188InquiryCAD
KFHL 36KFHL 036 503625100158212InquiryCAD
KFHL 40KFHL 040 504025100158212InquiryCAD
KFHL 45KFHL 045 504537100175256InquiryCAD
KFHL 50KFHL 050 505037100175256InquiryCAD
KFHL 56KFHL 056 505650100200287InquiryCAD
KFHL 60KFHL 060 506050100200287InquiryCAD
KFHL 70KFHL 070 507075100225315InquiryCAD
KFHL 80KFHL 080 508075100225315InquiryCAD
KFHL 90KFHL 090 5090125130260416InquiryCAD
KFHL 100KFHL 100 50100125130260416InquiryCAD
KFHL 125KFHL 125 50125165100350422InquiryCAD


 

KFHW, special version for machine tools

SITEMA - KFHW locking units are also suitable for operation in the presence of coolant/lubricant. For this reason, all the external parts and sealing surfaces are made of stainless steel
Should heavy soiling conditions (grinding dust, swarf, chips, other liquids, etc.) or extreme temperatures exist, please contact our technical department.

SITEMA Locking Units
KFHW, Special version for machine tools

Clamping via disc springs, hydraulic releasing

For complete measurements see:
F16 - Dimensions, type KFHW

TypeIdent.-NoRod Ø mmHolding capacity kNRelease press barCasing Ø mmCasing Length mm  
KFHW 18KFHW 018 011854075122InquiryCAD
KFHW 25KFHW 025 0125125096140InquiryCAD
KFHW 32KFHW 032 01322050115173InquiryCAD
KFHW 40KFHW 040 10403550140200InquiryCAD

KFH/X, square casing (hydraulic)

for standard cylinders DIN 24554 (160 bar)

 
  1. Cylinder with smallest rod diameters
  2. Cylinder with bigger rod diameters
  3. Extended tie-rods without nuts
  4. Customer-supplied coupling flange
  5. Vacant fastening threads at the front face

SITEMA Locking Units
type KFH/X

Clamping via disc springs, hydraulic releasing

For complete measurements see:
F13 - Dimensions, type KFH/X

TypeIdent.-NoRod Ø mmHolding capacity kNRelease press barCasing Height mmCasing Length mm  
KFH/X 18KX 018 111854063152InquiryCAD
KFH/X 22KX 022 112294076196InquiryCAD
KFH/X 28KX 028 1128125090200InquiryCAD
KFH/X 36KX 036 11362250115230InquiryCAD
KFH/X 45KX 045 11452040127264InquiryCAD
KFH/X 56KX 056 11563540165300InquiryCAD
KFH/X 18KX 018 1018107063152InquiryCAD
KFH/X 22KX 022 1022157076196InquiryCAD
KFH/X 28KX 028 1028209090200InquiryCAD
KFH/X 36KX 036 10363580115230InquiryCAD
KFH/X 45KX 045 104545100127264InquiryCAD
KFH/X 56KX 056 105680100165300InquiryCAD

KFH/Z, tie-rod casing (hydraulic)

for ISO 6020/2 standard cylinders
variable concerning rod diameter
5 mounting styles available: TB, JJ, C, D, DB
F19 - Dimensions, type KFH/Z

 
  1. Customer-made coupling flange
  2. Milles pockets are provided to clear tied-rod nuts

 

CAD

 

KFPC, special version (pneumatic)

SITEMA Locking Units
type KFPC

Clamping via disc springs, hydraulic releasing

For complete measurements see:
F21 - Dimensions, type KFPC (pneumatic)

TypeIdent.-NoRod Ø mmHolding capacity kNRelease press barCasing Ø mmCasing Length mm  
KFPC 30KFPC 030 0130124138195InquiryCAD

KFP/Z, tie-rod casing (pneumatic)

for standard cylinders ISO 6431/VDMA
F20 - Dimensions, type KFP (pneumatic)

  

 

CAD

Hydraulic clamping and releasing

The type KB is especially suited to meet extreme specifications. A wide range of special versions have been built with shaft diameters from 25 to 360 mm and holding capacities extending to more than 5000 kN.

 

Type KB, (hydraulic)

SITEMA Locking Units
type KB

Hydraulic clamping and releasing

For complete measurements see:
F15 - Dimensions, type KB

TypeIdent.-NoRod Ø mmHolding capacity kNRelease press barCasing Ø mmCasing Length mm  
KB 40KB 040 054080160138196InquiryCAD
KB 56KB 056 0356140160170230InquiryCAD
KB 80KB 080 0680280160226270InquiryCAD
KB 100SK 100 059100330130280322InquiryCAD
KB 110SK 110 032110450130300344InquiryCAD
KB 125SK 125 034125450130300344InquiryCAD
KB 140SK 140 030140600130335392InquiryCAD
KB 160SK 160 021160800130375402InquiryCAD
KB 180SK 180 013180950130405434InquiryCAD
KB 200SK 200 0132001100130425444InquiryCAD
KB 200SK 200 0182001500140455544InquiryCAD

Type KBP (pneumatic)

pneumatic version (type KBP) on request

 

Accessories

Auto-Bleeder

Air in hydraulic systems can cause various problems. Especially the dieseling-effect (compression-ignition of air-oil mixture) can cause damages to seals and sealing surfaces. Clamping devices are exceptionally in danger to this effect, due to their small hydraulic volume. Especially if the Clamping Device is situated on the very top of the hydraulic system a single manual bleeding is not always sufficient. At least in these cases an Auto-Bleeder is strongly recommended.

同類產品推薦
在找 德國SITEMA夾緊裝置 產品的人還在看

提示

×

*您想獲取產品的資料：

以上可多選，勾選其他，可自行輸入要求

個人信息：