后入式动态图,亚洲无码:免费性爱视频

參考價	面議

產品簡介

產地	國產	產品大小	其他
產品新舊	全新	結構類型	其他
自動化程度	其他

YP 系列盤式連續干燥機
采用夾層式換熱，可由蒸汽、熱水、導熱油加熱，一般夾層壓力≤0.4MPa，高壓可以訂做。

詳細介紹

YP 系列盤式連續干燥機

（一）干燥盤

采用夾層式換熱，可由蒸汽、熱水、導熱油加熱，一般夾層壓力≤0.4MPa，高壓可以訂做。

（二）物料傳送系統

1. 主軸轉速：1－10轉/分, 電磁或變頻無級調速。

2. 耙臂：每層干燥盤上有2－8支固定在主軸上的耙臂。

3. 耙葉：絞接在耙臂上, 能隨盤面上下浮動保持接觸, 有多種形式。

4. 碾滾：對易結塊和需要破碎的物料，在適當位置配加碾滾，可以強化傳熱和干燥過程。

（三）殼體有常壓、密閉、真空三種型式

1. 常壓型：圓筒或八棱柱形，有整體和對開兩種結構。加熱介質進出口主管道可以在殼體內，也可以在殼體外。

2. 密閉型：圓筒形殼體，能承受5Kpa內壓，加熱介質進出口主管道可以在殼體內，也可以在殼體外。

3. 真空型：圓筒形殼體，設計壓力為外壓0.1MPa, 加熱介質進出口主管道在殼體內。

（四）空氣加熱器一般在蒸發量較大的情況下使用, 以增強干燥效率。YP 系列盤式連續干燥機

1. Drying plate

(1) Desiging pressure: general is 0.4MPa, Max. can reach 1.6MPa.

(2) Work pressure: general is less than 0.4MPa, and max. can reach 1.6MPa.

(3) Heating medium:steam, hot water,heat transfer oil. When the drying plates’ temperature is 100℃, hot water can be used ; when 100℃~150℃,it will be satu- rated water steam ≤0.4MPa or steam-gas, an when 150℃~320℃,it will be heat transfer oil; when ＞320℃ it will be heated by electric, oil or fused salt.

2. Material transmission system

(1) Main shaft revoluton: 1~10rpm, electromagnetism or stepless speed regulation by inverter.

(2) harrow arm: There are 2 to 8 pieces arm that be fixed on the headstock on the every layers.

(3) Harrow’s blade: Surrounding the harrow’s blade, float together with the surface of the plate to keep contact. There’re various of types.

(4) Roller: for the products easily agglomerate, or with the requirements of grinding, the heat transfer and drying process might be reinforced by placing roller(s) at the appropriate place(s).

3.Shell

There’re three types for option: normal pressure, sealed and vacuum

(1) Normal pressure:

(2) Sealed: Cylindrical shell, could bear the interior pressure of 5KPa, the main ducts of the inlet and outlet of heating media might be inside of the shell or outside.