 |
深圳市德威達科技有限公司
主營產品：公司代理品牌有 美國 DWYER、ANDERSON、MERCOID、ITT、德國BECK、新加坡TELASIA等，產品涉及壓力、流量、液位物位、風速、溫濕度、閥門、氣體檢測、燃燒、數據采集等，廣泛應用 ... |
會員1.png)
|
深圳市德威達科技有限公司
主營產品：公司代理品牌有 美國 DWYER、ANDERSON、MERCOID、ITT、德國BECK、新加坡TELASIA等，產品涉及壓力、流量、液位物位、風速、溫濕度、閥門、氣體檢測、燃燒、數據采集等，廣泛應用 ... |
暫無信息 |
| 參考價 | 面議 |
聯系方式：劉女士查看聯系方式
更新時間：2018-05-14 09:00:00瀏覽次數：8034
聯系我們時請說明是制藥網上看到的信息，謝謝!
產品名稱: TE系列防腐型標準孔板流量計
產品型號: TE系列
PTFE材質，用于液體或氣體
產品介紹
The Series TE Orifice Plate Flowmeter offers one-piece PTFE construction similar to the OP and PE Series orifice plates, which incorporate a unique holder or carrier ring containing metering taps and integral gaskets. Available for line sizes from 1/2" to 24", the Series TE orifice plate can be used with gases, liquids, corrosive, and high temperature fluids. The Series TE can be easily installed by slipping the unit between standard flanges （orifice flanges are not required）. The Series TE was designed for use anywhere there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness.
技術參數
介質： Air and compatible gases, corrosives, high temperature fluids, and liquids.
精度： ±0.6% full scale flow （Beta = .2-.6） ±0.7% for Beta greater than .6.
溫度： -40 to 200°F （-40 to 93.3°C）.
壓力： 150 psi max （10 bar max）.
壓損： 1-Beta ratio² eg: 1 - 0.7² = 1 - 0.49 = 51% of the d.p.
尺寸： 1/2" to 24", special and non-standard sizes available.
連接： 1/4" female NPT.
安裝： Standard flange 125#/150# rating.
管路： General requirements 10 diameter upstream and 5 diameter downstream.
重量： Varies with line size. See catalog page.
選型：
1/2" 到24"，請咨詢我司。
