深圳市德威達科技有限公司
主營產品:公司代理品牌有 美國 DWYER、ANDERSON、MERCOID、ITT、德國BECK、新加坡TELASIA等,產品涉及壓力、流量、液位物位、風速、溫濕度、閥門、氣體檢測、燃燒、數據采集等,廣泛應用 ... |
深圳市德威達科技有限公司
主營產品:公司代理品牌有 美國 DWYER、ANDERSON、MERCOID、ITT、德國BECK、新加坡TELASIA等,產品涉及壓力、流量、液位物位、風速、溫濕度、閥門、氣體檢測、燃燒、數據采集等,廣泛應用 ... |
暫無信息 |
參考價 | 面議 |
聯系方式:劉女士查看聯系方式
更新時間:2018-05-14 09:00:00瀏覽次數:2056
聯系我們時請說明是制藥網上看到的信息,謝謝!
產品名稱: FMS系列流量開關
產品型號: FMS系列
適用于水或油,輸出:PNP常開或PNP常閉
產品介紹:
Series FMS Flow Sensor FMS-1 is for applications requiring RELATIVE measurement and set-point of flow rate. This means that the actual velocity of the flow or the quantitative measurement in GPM is not known and is not important. What is important is that the set-point can be set as a "percentage of" or "relative to" the full flow rate. No other flow sensor could do it this simply or effectively.
原理:
The model FMS uses a set of flashing LED's to indicate flow. All 7 of the LED's will remain lit to show * flow rate. The flow OK light will also be lit showing that the established full flow rate is what is flowing in the pipe. When you initially set the flow rate, it will mark that as your * mark. If your flow reduces below the 50% mark, you will get an alarm from the sensor.
If flow increases beyond the initially established flow rate, the "Overflow" LED light will come on. It is then the operator's decisions as to whether to ignore it if too much flow is not a problem and may actually choose this flow rate to be the new "normal" flow rate. This can be done by just depressing the "set" button until all LED's flash. The FMS has now recalibrated itself to the new flow rate. The "Flow ok" LED will again light and the set-point will automatically be re-set at the 50% of flow point.
技術參數:
介質:Water and water based liquids/oil and oil-based liquids.
材質: Sensor Head: 303 SS.
低流量設定: Auto set @ 50% / Adjustable via "set" push button.
設定范圍: 5.0 ft/sec (0-150 cm/sec.)
重復性: < 0.5%.
滯后: 10% of set-point value typical.
介質溫度: -4 to 176°F (-20 to 80°C.)
壓力: 450 psi (30 bar).
響應時間: 25 seconds (typical).
電源: 20-30 VDC (short circuit protected).
電流: < 200 mA.
功耗: 6 W max.
電氣連接: M12 male socket 4pin. Comes with 6.5 ft (2 m) cable with M12 connector and pigtail.
過程連接: 1/2" male NPT.
封裝: IP 65 (NEMA 4).
初始操作: After 15 seconds.
輸出: PNP N.O. (switch closed with flow), PNP N.C. (switch open with flow).
重量: .55 lb (.25 kg).
型 號 | 輸出類型 |
FMS-1 | PNP N.O (常開) |
FMS-2 | PNP N.C (常閉) |