高壓漏電起痕試驗儀

高壓漏電起痕試驗儀BLD-6000V概述：Overview of bld-6000v high voltage leakage tracking tester:

高壓漏電起痕試驗儀  在電器產品受潮濕和雜質環境的影響下，不同極性帶電部件之間或帶電部件與接地金屬之間可能會引起絕緣上的漏電，產生的電弧對電器造成擊穿短路或由于放電使材料電蝕損，甚至起燃導致火災。漏電起痕試驗就是模擬上述情況對絕緣材料進行的一種破壞性試驗，用以測量和評定在規定電壓下，絕緣體在電場和含雜質水的作用時的相對耐漏電起痕性，適用于電工電子產品、家用電器的固體電器絕緣材料及其產品，如：繼電器插座、轉換開關蓋、接觸器等……。Under the influence of humidity and impurity environment on electrical products, electric leakage on insulation may be caused between live parts of different polarity or between live parts and grounding metal. The electric arc generated will cause breakdown and short circuit to electrical appliances or material erosion due to discharge, or even fire disaster. Leakage tracking test is a kind of destructive test simulating the above conditions on insulating materials, which is used to measure and evaluate the relative resistance of insulator to leakage tracking under the action of electric field and impurity water under the specified voltage. It is applicable to solid electrical insulating materials and products of electrical and electronic products and household appliances, such as relay socket, switch cover, contactor, etc. ...

特點：Characteristic:

試驗儀由試驗部分和控制部分組成采用一體化設計， 方便現場安裝和調試。 試驗箱外殼及結構件采用 S304不銹鋼或黃銅制造；電極頭為不銹鋼，耐高溫耐腐蝕；滴液計數準確，控制系統穩定可靠。The tester is composed of the test part and the control part, and adopts the integrated design to facilitate the field installation and commissioning. The shell and structural parts of the test chamber are made of S304 stainless steel or brass; the electrode head is made of stainless steel, resistant to high temperature and corrosion; the drop count is accurate, and the control system is stable and reliable.

高電壓起痕試驗機（含高電壓發生器）High voltage marking tester (including high voltage generator)

依據標準：GB/T6553-2003Standard: GB / t6553-2003

性能指標performance index

1、電極：厚 0.5mm 材質：不銹鋼；1. Electrode: 0.5mm thick material: stainless steel;

2、上下電極距離：50.0mm±0.1；2. Distance between upper and lower electrodes: 50.0mm ± 0.1;

3、試驗電壓：100V-6000V 可調；3. Test voltage: 100v-6000v adjustable;

4、調壓器：輸出：0～250V 可以調，容量 5KVA；4. Voltage regulator: output: 0-250V adjustable, capacity 5KVA;

5、試驗變壓器：容量 5KVA，   高輸出電壓 AC6000V（或 DC6000V 可選） ；5. Test transformer: capacity 5KVA, maximum output voltage ac6000v (or dc6000v optional);

6、高精度穩壓器：輸出 AC220V 功率 6000W，精度±1%；6. High precision voltage regulator: output AC220V power 6000W, precision ± 1%;

7、回路電流為 60mA 時，切斷電壓輸出；7. When the circuit current is 60mA, cut off the voltage output;

8、試驗時間：6 小時；8. Test time: 6 hours;

9、滴液精度：0.5%；9. Drop accuracy: 0.5%;

10、電壓穩定度：±1%；10. Voltage stability: ± 1%;

11、起痕判斷：依標準 GB/T6553-2003/4.1.2 規定，在試樣上施加電壓（2.5k V,3. 5k V 和 4.5k V） ，并以一定流速滴污染液，在 60mA 以下的電流持續 6H 不過流即為通過；

11. Judgment of trace initiation: according to the provisions of GB / t6553-2003 / 4.1.2, apply voltage (2.5KV, 3.5kv and 4.5kv) to the sample, and drop the contaminated liquid at a certain flow rate. If the current below 60mA continues to flow for 6h, the sample will pass.

12、滴液裝置：12. Drip device:

采用雷弗精密蠕動泵，流量范圍 0.00185 ～20 毫升/分鐘，工作轉速 0.1～50 轉/分鐘，流量精度誤差：＜0.5%；The precision peristaltic pump is adopted, the flow range is 0.00185-20ml/min, the working speed is 0.1-50r/min, and the flow accuracy error is less than 0.5%.

13、輸出電壓：交流/直流（可切換）13. Output voltage: AC / DC (switchable)

14、實驗組數：五組14. Number of experimental groups: five groups

15、控制裝置：采用西門子 PLC+中國臺灣威綸觸摸屏控制，控制精密，操作簡單，設計*人性化，試驗結束自動生成報告，面板熱敏打印機可以適時打印試驗結果；15. Control device: Siemens PLC + Taiwan vinylon touch screen control, precise control, simple operation, fully humanized design, test results

The test results can be printed by panel thermal printer.

16、外形尺寸(mm)：710(寬)×365(深)×760(高) 箱體內容積:0.1m316 Boundary dimension (mm): 710 (W) × 365 (d) × 760 (H) box volume: 0.1m3

17、機箱：采用 SUS304 不銹鋼（拉絲面） ；17 Case: SUS304 stainless steel (drawing surface);

18、污液槽采用 316 不銹鋼，加裝密閉裝置。18. The sewage tank is made of 316 stainless steel and equipped with sealing device.

滴液裝置時間常數可調，使滴液量和滴液時間間隔得到精確控制。The time constant of the dropping device can be adjusted, so that the drop quantity and the time interval of the drop can be precisely controlled.

配置：建議選配電子測重裝置

公司承諾：The company undertakes:

1.購機前，我們專門派技術人員為您設計的流程和方案

2.購機后，將免費指派技術人員為您調試安裝

3.整機保修一年，產品終身維護

4.常年供應設備的易損件及耗品確保儀器能*使用

5、售后管理：我公司實現計算機化管理，實行客戶定期電話回訪制度，定期復查設備的工作情況，定期電話指導用戶對設備進行保養和檢測，以便設備正常運轉，跟蹤客戶的設備使用情況，以便及時對設備進行維護

6、物流情況：及時提供貨源，確保全國范圍內2-10內到貨，持續穩定地為代理商做全面服務工作，提供合理的運作空間。公司有專業的技術人員為您安裝指導。

7、軟件升級：終生免費提供新版本控制軟件。

8、安裝培訓:儀器包裝內附有說明書，專業培訓人員為客戶操作者講解儀器正常操作流程、操作注意事項及儀器的日常維護要求；也可以根據客戶要求提供上門培訓服務。

好質量好品牌好服務在北京北廣精儀。