多功能膠囊填充機|多功能膠囊填充機圖片|多功能膠囊填充價格是在 CGN208-D機型上研發改進的一種新型高效的微丸充填設備,新型的膠囊調頭總成全部采用圓柱肖定位設計使該機在更換調試模具時間從原來的45分鐘壓縮到5--8分鐘。新型在線微丸計量裝置(技術)可在不停機的狀態下調節微丸裝量?？梢苑奖憧煽康膶?shí)現微量調整。下料采用助力下料原理可以有效解決微丸靜電吸附原因造成的計量誤差,提高裝量精度。選用粉劑附件(選配)可以輕松實現充填粉劑和顆粒,實現一機多能。

|圖片|多功能膠囊填充價格采用觸摸屏PLC可編程控制器、變頻調速裝置。電、氣聯合控制，代替手工充填，減輕勞動強度,是中小制藥企業、藥物研發機構、醫院制劑室采用的多功能型的膠囊充填設備。

CGN208-D type capsule filling machine is a new efficient equipment based on DTJ-C model (old type) after research and development: easier more intuitive and higher loading in capsule dropping, U-turning, vacuum separation in comparison with the old type. The new type of capsule orientating adopts columns pill positioning design, which shortens the time in the replacement of mould from the original 45 minutes to 5-8 minutes. This machine is one type of electricity and pneumatic combined control, automatic counting electronics, programmable controller and frequency conversion speed regulating device. Instead of manual filling, it reduces labor intensity, which is the ideal equipment for capsule filling for small and medium-sized pharmaceutical companies, pharmaceutical research and development institutions and hospital preparation room.

|圖片|多功能膠囊填充價格主要技術參數：

|圖片|多功能膠囊填充價格標準配置清單

配置如有修改恕不另行通知，以合同為準