TDP7704低壓差分探頭

TDP7700系列三模探頭為實時示波器提供了的探頭保真度。此外，TDP7700系列探頭還具有一些連接性創新，比如將探針的輸入緩沖器安裝在距離探針末端只有幾毫米的地方，從而實現了向下焊接等連接，為連接當今挑戰性的電子設計提供了的可用性。

關鍵特性

高帶寬的信號保真度

8 GHz TDP7708

6 GHz TDP7706

4 GHz TDP7704

最小設備的影響

薄而靈活的焊錫頭

輕巧靈活的探頭電纜

主動緩沖頭設計為低探頭加載

易于連接TekFlex™連接器技術

Pinch-to-Open配件連接器

通用連接性-焊點下降提示，可選的手持或固定探針瀏覽器，同軸輸入(SMA適配器)

交叉兼容P7700系列配件

全帶寬為8ghz

探頭電纜和焊料下降頭工作在一個擴大的溫度范圍

探針和特定的s參數

基于的s參數模型，對探頭和針尖信號路徑進行全交流標定

為每個探針和探針頭創建的DSP濾波器

用于示波器/探頭控制和可用性的TekVPI+®接口

直接控制通過探頭按鈕或從示波器的菜單

通過示波器自動控制探頭的設置

與示波器連接時探頭和探頭的自動識別

通過示波器遠程控制探頭

TDP7700系列三模探頭

通過三模探測，一個探針裝置可以精確地測量差分、單端和共模。這種的功能使您能夠更有效地工作，在差分、單端和共模測量之間切換，而無需移動探頭的連接點。

The TDP7700 Series TriMode probes provide the highest probe fidelity available for real-time oscilloscopes. In addition, with connectivity innovations such as solder down tips with the probe’s input buffer mounted only a few millimeters from the end of the tip, the TDP7700 series probes provide unmatched usability for connecting to today’s most challenging electronic designs.

Key features

• High bandwidth for signal fidelity

• 8 GHz TDP7708

• 6 GHz TDP7706

• 4 GHz TDP7704

• Minimal device impact

• Thin and flexible solder tips

• Lightweight and flexible probe cable

• Active buffer tip design for low probe loading

• Easy to connect TekFlex™ Connector technology

• Pinch-to-Open accessory connector

• Versatile Connectivity - solder down tips, optional browser for handheld or fixtured probing, and coaxial input (SMA adapter)

• Cross compatibility with P7700 series tip accessories

• Full Bandwidth to 8 GHz

• Probe cable and solder down tips operate over an extended temperature range

• Probe and tip specific S-parameters

• Full AC calibration of the probe and tip's signal path based upon unique s-parameter models

• Unique DSP filters created for each probe and tip

• TekVPI+® interface for oscilloscope/probe control and usability

• Direct control via probe buttons or from the oscilloscope's menus

• Automated control of probe settings via the oscilloscope

• Automatic recognition of the probe and tip when attached to the oscilloscope

• Remote control of probe through the oscilloscope

TDP7700 Series TriMode Probes

With TriMode probing one probe setup makes differential, single ended, and common mode measurements accurately. This unique capability allows you to work more effectively and efficiently, switching between differential, single ended and common mode measurements without moving the probe's connection points.