DMC系列·脈沖除塵器（捕集器）

產品詳情：

DMC系列·脈沖除塵器（捕集器）
DMC series · Pulse dust collector
工作原理：
含塵氣體進入除塵器后，氣固兩相流在內置的數個濾袋表面被分離，氣體濾清后從后道風管被引風機排空，粘附在濾袋上的微細顆粒在定時脈沖清灰氣的作用下被擊打下來，沿筒壁從下料口卸出。
working principle:
After the dust-containing gas enters the dust collector, the gas-solid two-phase flow is separated on the surface of several built-in filter bags. After the gas is filtered, it is evacuated from the rear duct by the induced draft fan, and the fine particles adhering to the filter bag are struck down under the action of regular pulse cleaning gas and discharged from the discharge port along the wall of the cylinder.
 
設備特點：

1.   過濾效率高，可捕集0.1μm以上的微細顆粒，*可以滿足氣體排放的國家環保標準。
2.   可以作為旋風分離器后的末端除塵裝置，也可以直接作為的收料裝置。
3.   可根據客戶物料特點，采用具有耐高溫、耐腐蝕等特點的特殊濾料，并且可采用離線分腔式結構，保證高效過濾。也可以采用濾筒、燒結板等其他過濾介質。
4.  

1. High filtration efficiency, which can capture fine particles above 0.1μm, which can fully meet the national environmental standards for gas emissions.
2. It can be used as the terminal dust removal device after the cyclone separator, or it can be directly used as the only material collection device.
3. According to the characteristics of customer materials, special filter materials with high temperature resistance and corrosion resistance can be used, and offline sub-cavity structure can be used to ensure efficient filtration. Other filter media such as filter cartridges and sintered plates can also be used.
 
技術參數表(Technical Data Sheet)：

注：具體匹配與產品粒度分布、含塵量、物料比重等有關，具體可與我司工程師溝通，非標型號可定制。
Note: The specific matching is related to the product particle size distribution, dust content, material specific gravity, etc., specific can be communicated with our engineers, non-standard models can be customized.
 
實物圖片(Physical picture)：