2231A-30-3型3通道直流電源總輸出功率為195W，可以為多種電路和器件的 臺式測試提供所需的功率。其中，兩個通道均可以提供30V@3A，第3個通道可以 提供5V@3A。2231A-30-3型電源在不降低性能或便利性的同時，為您提供所需的 多用性和易用性，因此，它將成為您工作臺上的直流電源。
主要特點:
通過1臺儀器獲得3個獨立、隔離、 可調的輸出
輸出總功率195W，包括2個 30V@3A輸出和1個5V@3A輸出
0.06%電壓測量基本準確度， 0.2%電流測量基本準確度
直流電源輸出噪聲低于5mVp-p
連續顯示3個通道的電壓和電流 測量結果
將2個30V通道進行串聯或并聯， 可以使輸出電壓或電流翻倍
可在30個設置內存中的任意位置， 存儲常用的測試配置
利用每個通道的輸出定時器， 可以在預先設置的測試時間 之后關閉任何輸出
利用可選配的USB適配器，可以 通過計算機控制電源
應用
工科和理科學生實驗室
服務工作
電子設計
高質量直流電源
2231A-30-3型電源基于線性化設計，每個輸出的噪聲低于5mVp-p。其電壓和 電流基本測量準確度分別是0.06%和0.2%。負載電壓和負載電流回讀結果提供同樣 級別的精度，因此您可以確信為待測器件(DUT)提供了高精度、低噪聲電壓和電流。
3個獨立的輸出
2231A-30-3型電源的每個輸出都是可編程的，可以彼此獨立地開啟和關 閉；它在1臺儀器內提供了3個電源。您可以通過同一臺儀器為印制電路板上的模擬 電路和數字電路上電，也可以為整個器件上電。
所有輸出都彼此隔離，且接地隔離
每個輸出都可以為不同接地基準的電路供電。每個輸出的低連接都不與其他輸 出相連。這意味著，一個電源可以測試3個不同接地基準上的3個獨立電路，或者為 變壓器電路或光隔離電路供電。此外，所有輸出都參考接地，因此2231A-30-3型 電源可以為浮動電路和接地電路供電。
The total output of the 2231a-30-3 type 3-channel dc power supply is 195W, providing the power required for desktop testing of a variety of circuits and devices. Two channels can provide 30v@3a, and the third channel can provide 5v@3a. The 2231a-30-3 power supply provides you with the versatility and ease of use you need without compromising performance or convenience, so it will be the only dc power supply for your workstation.
Main features:
Three independent, isolated and adjustable outputs are obtained through one instrument
The total output power is 195W, including 2 30v@3a outputs and 1 5v@3a outputs
Basic accuracy of voltage measurement is 0.06%, and basic accuracy of current measurement is 0.2%
The output noise of dc power supply is lower than 5mvp-p
Continuous display of 3 channel voltage and current measurements
The output voltage or current can be doubled by connecting two 30V channels in series or in parallel
Common test configurations can be stored anywhere in 30 Settings memory
Using the output timer for each channel, you can turn off any output after a preset test time
With the optional USB adapter, you can control the power supply through the computer
application
Engineering and science student LABS
Service work
Electronic design
High quality dc power supply
The model 2231a-30-3 power supply is based on a linearized design, with each output noise lower than the 5mvp-p. The basic measurement accuracy of voltage and current is 0.06% and 0.2%, respectively. The load voltage and load current read back results provide the same level of accuracy, so you can be sure that the device under test (DUT) provides high precision, low noise voltage and current.
Three completely independent outputs
Each output of the 2231a-30-3 power supply is fully programmable and can be turned on and off independently of each other. It provides three power sources in one instrument. You can use the same instrument to power analog and digital circuits on a printed circuit board, or to power the entire device.
All outputs are isolated from each other and are grounded
Each output can supply power to a circuit with a different ground reference. Each output low connection is not connected to the other outputs. This means that a single power supply can be used to test three separate circuits on three different ground bases, or to supply transformer circuits or optical isolation circuits. In addition, all outputs are reference grounded, so model 2231a-30-3 power supplies can be used for both floating and grounded circuits.
采購中心
