設備特點 Features of equipment
★物料無離心力作用，無比重偏析及分層、積聚現象、混合率可達99.9%。
★裝料率大，可達80%（普通混合機僅為40%），效率高，混合時間短。
★筒體各處為圓弧過渡，經過精密拋光處理，達到“GMP”要求。
★Because the mixing barrel moves in multi directions, there is no centrifugal force acting on the materials, as well as no phenomena of gravity segregation, lamination and accumulation of materials so that the mixing rate can be up to 99.9%.
★The barrel has high loading rate (max.80 percent, however, only 40 percent for the conventional mixers), so that it features high efficient and short mixing time.
★The barrel transitional radius everywhere, conform to GMP.
項目ltem 規格Specification | HD-1 | HD-5 | HD-15 | HD-50 | HD-100 | HD-200 | HD-400 | HD-600 | HD-800 | HD-1000 |
料筒容積(L) Barrel volume | 1 | 5 | 15 | 50 | 100 | 200 | 400 | 600 | 800 | 1000 |
裝料容積(L) Max.loading volume | 0.8 | 4 | 12 | 40 | 80 | 160 | 320 | 480 | 640 | 800 |
裝料重量(kg) Max.loading capacity | 0.5 | 2.4 | 7.5 | 25 | 50 | 100 | 200 | 300 | 400 | 600 |
主軸轉速(r/min) Speed of driving shaft | 15~30 | 8~15 | ||||||||
電機功率(kw) Motor power | 0.12 0.25 | 0.37 | 1.1 | 1.5 | 2.2 | 4 | 5.5 | 7.5 | 7.5 | |
外形尺寸(長×寬×高) Overall dimensions(LxWxH)(mm) | 500x600 x600 | 600x1000 x1000 | 700x1000 x1000 | 1000x1400 x1200 | 1200x1700 x1500 | 1400x1800 x1600 | 1800x2100 x1950 | 1900x2100 x2250 | 2200x2400 x2300 | 2250x2600 x2300 |
整機重量(kg) Total weight | 50 | 150 | 200 | 300 | 500 | 800 | 1200 | 1500 | 2000 | 2500 |
所有參數僅作參考，視物料情況，本公司擁有變更權利，并不另行通知。
All datas are used for reference only. According to the condition of material, our factory has the right to change but not notice, pardon!
采購中心
