進口二通黃銅電磁閥
德國托普進口二通黃銅電磁閥工作原理：
進口黃銅電磁閥是用來控制流體的自動化基礎元件，屬于執行器；并不限于液壓，氣動。電磁閥用于控制液壓流動方向，工廠的機械裝置一般都由液壓鋼控制，所以就會用到電磁閥。電磁閥里有密閉的腔，在的不同位置開有通孔，每個孔都通向不同的油管，腔中間是閥，兩面是兩塊電磁鐵，哪面的磁鐵線圈通電閥體就會被吸引到哪邊，通過控制閥體的移動來檔住或漏出不同的排油的孔，而進油孔是常開的，液壓油就會進入不同的排油管，然后通過油的壓力來推動油剛的活塞，活塞又帶動活塞桿，活塞竿帶動機械裝置動。這樣通過控制電磁鐵的電流就控制了機械運動。
Brass solenoid valve is used to control the flow of the basic components of automation, is the actuator; not limited to hydraulic, pneumatic. Solenoid valve used to control the direction of hydraulic flow, the factory's mechanical devices are generally controlled by hydraulic steel, so the solenoid valve will be used. Solenoid valve in a closed chamber, at different locations to open a hole, each hole leads to different pipeline, the middle valve chamber, both sides are two electromagnets, which face the magnet coils body will be attracted to which side, different discharge of oil through the control valve moves to block or leakage the hole, and the oil inlet hole Shichang opened, hydraulic oil will enter the drain pipes of different, then the oil pressure to push the piston oil just, piston and piston rod, the piston rod drive mechanism moving. By controlling the current of the electromagnet, the mechanical motion is controlled.
進口二通黃銅電磁閥概述：
進口二通黃銅電磁閥為分步動作直接先導式電磁閥，可根據斷電時所處開、關狀態的不同，可分為常閉式電磁閥和常開式電磁閥。 常閉電磁閥，線圈通電后，銜鐵在電磁力作用下先帶動副閥閥塞提起，主閥閥杯上的流體經副閥流走，減少了作用在主閥閥杯上的壓力，當主閥閥杯上的壓力減少到一定值時，銜鐵帶動主閥閥杯，并利用壓差而使主閥閥杯開啟，介質流通。 線圈斷電后，電磁力消失，銜鐵因自重下落復位。同時依靠介質壓力，主副閥得以緊密關閉。電磁閥定制方案提供商-電子（流體控制閥） 常開電磁閥，線圈通電后由于吸力作用，動鐵芯下移，把副閥閥塞壓下，副閥關閉，主閥閥杯內壓力上升，當壓力升到一定值時，主閥閥杯的上下壓差一樣，由于電磁力作用，動鐵芯推動主閥閥杯下，壓緊主閥閥座，閥門關閉。電磁閥定制方案提供商-電子（流體控制閥） 線圈斷電時，電磁吸力為零，副閥閥塞和動鐵芯由于彈簧作用向上提起，副閥打開，主閥閥杯上的流體經副閥流走，減少了作用在主閥閥杯上的壓力，當主閥閥杯上的壓力減少到一定值時，利用壓差把主閥閥杯推起，電磁閥打開，介質流通。電磁閥定制方案提供商-電子（電磁閥定制）
Imported two way brass solenoid valve for the direct action of the pilot solenoid valve, according to the opening and closing of the state of the different, can be divided into normally closed solenoid valve and normally open solenoid valve. Normally closed solenoid valve coil is energized, the armature of the electromagnetic force of the first drive side valve SETI, the main valve cup of the fluid flow out by the vice valve, reducing the pressure in the main valve valve cup, when the main valve to reduce pressure on the cup to a certain value, the armature driving the main valve valve cup, and use pressure to open the main valve cup, medium circulation. Coil power, the electromagnetic force disappears, the armature weight whereabouts reset. At the same time rely on medium pressure, the main valve to close tightly. Customized solutions provider - Electronic solenoid valve (flow control valve) normally open solenoid valve, the suction after the coil is energized, moving core down, the vice valve pressure, the Deputy valve closed, the main valve valve cup pressure rise, when the pressure rose to a certain value, the main valve valve cup. Differential pressure, due to electromagnetic force, the moving core to promote the main valve cup, pressing the main valve seat, the valve closed. Customized solutions provider - Electronic solenoid valve (flow control valve) coil power, the electromagnetic force is zero, the Deputy valve plug and the moving core as spring lift, vice valve is opened, the main valve cup of the fluid flow out by the vice valve, reducing the pressure in the main valve cup. When the main valve to reduce pressure on the cup to a certain value, the use of pressure to push the main valve cup, electromagnetic valve open, medium flow. Solenoid valve customized solutions provider - Electronic (solenoid valve custom)
進口二通黃銅電磁閥技術參數：
壓力：0～10kg/cm2 zui大耐壓力：16kg/cm2
工作溫度：-5～80℃ 電壓波動范圍：±10% 動作方式：直動式
型式、常閉式（即通電后閥開啟，或常開式（通電閥關閉）。
工作壽命＞15萬次 絕緣等級：B級 經圈溫升＜75℃
功率＜15W 口徑范圍：DN10-50(3/8”-2) 閥體材質：黃銅 連接方式：螺紋
采購中心
